Hama "RS100" Audio Extension Set, REAR Surround

• Expands your existing audio system with a powerful sound system for a captivating TV experience and pure music enjoyment
  
  Transmitter connections:
• Mains connection
• S/P-DIF optical out (Toslink)
• S/P-DIF optical in (Toslink)
• Aux in (3.5 mm)
• LINE out (3.5 mm)
• Update port (USB type A)
  
  Receiver connections
• Mains connection
• Connection terminals for feedback channel loudspeaker (R/L)
  
  Technical Information
• Dolby Surround DE & EN coder
• Open brand system
  
  Miscellaneous
• Both return channel loudspeakers have a mounting preparation for mounting on a suitable wall bracket

• 1 transmitter
• 1 receiver
• 1 power supply unit (5 V, 1 A)
• 1 power supply unit (12 V, 1.5 A)
• 2 loudspeakers
• 1 audio cable, 3.5 mm jack (stereo)
• 2 optical signal cables
• 2 loudspeaker cable
• 1 adapter cable, 3.5 mm jack plug (stereo) - 2 x RCA socket
• 1 adapter cable, 3.5 mm jack socket (stereo) - 2 x RCA plug
• 1 remote control
• 1 CR2025 battery
• 1 quick-start guide (multi-lingual)

Positioning
Position the transmitter below or in front of your image / audio source. Position the receiver and loudspeaker behind your usual seating position.
The distance between the transmitter and receiver should not exceed 10 m.

Please note that the connection may require the output of digital audio signals to be activated on the image source.

Wiring
The analogue and digital audio inputs allow you to connect your device (TV / audio system) and play back its audio signal via the extension set. To do this, you can choose between a connection via a 3.5 mm audio cable (jack cable)/RCA cable or an optical signal cable.

The housing of the loudspeaker is made from hard plastic. Avoid direct sunlight, moisture (in kitchens or bathrooms) or positioning close to air-conditioning units.

Source of magnetic interference:
older TV sets can be a source of magnetic interference. If interference does occur, increase the distance between the product and the image source.