Hama "7010" Smart Watch, GPS, AMOLED 47 mm, Tel. Function, IP68 + 3 ATM, anthr.

The measurement functions for pulse, blood pressure, heart rate and oxygen provide you with orientation and help you to keep an eye on your health and activity. They are only suitable for general wellness and fitness purposes. The results are not intended for the detection, diagnosis (e.g. cardiac arrhythmia) or treatment of diseases or complaints. Please consult a medical specialist for detailed examinations and diagnoses.

Please check your watch for any firmware updates and install them. Make sure you always keep the software on your smart watch up to date.

The time cannot and does not have to be set manually. Once you have installed the app that comes with the watch and then paired and synchronised the watch with the app, the time, date and language settings are automatically transferred from the smartphone to the watch.

Check in the device settings of the Hama Fit Move app whether the watch is displayed as connected. If not, you can connect it to the phone as described in the operating instructions.
If you have paired the smart watch directly with your smartphone via Bluetooth, first disconnect this connection in your phone's Bluetooth settings and then pair the watch with the smartphone via the Hama app.
Further help on this topic can be found in the operating instructions and in the help section of the Hama Fit Move app.

Yes, the energy-saving mode allows you to achieve a significantly longer usage time - up to 25 days. You can activate this mode, in which most of the functions are deactivated, via the Hama Fit Move app in the settings.

If your smart watch does not vibrate despite being set to ""Strong vibration"", the following steps may help:
1. Make sure that both your watch and the app on your smartphone are up to date.
2. The ""Do not disturb"" mode (DND) could be activated. This prevents the watch from vibrating or displaying notifications. You can deactivate the mode in the app or directly on the watch:
In the app: Check whether a time period is set for DND mode (e.g. during your bedtime). Adjust the times as required.
On the watch: Activate the display by tapping the top wheel (crown) and swipe downwards. Look out for the symbol with the crescent moon at the top left. If it is highlighted in red, the mode is active. Tap the icon to deactivate the mode.
If the problem persists, please contact our customer service team.

From 30 June 2025, the "Google Fit" app will no longer work. In order not to lose previous training data, you should transfer your data from Google Fit to Health Connect.

Simply charge your smart watch again - preferably fully, but for at least an hour. After fully charging, use the drainage function to be sure. If you are in the water for an extended period, the smart watch may discharge completely because the sensitive display registers water contact as touch input. We therefore recommend selecting “Swimming” or another water activity on the smart watch when swimming or spending a long time in the water, even if you do not want to track anything. The display then blocks and the rechargeable battery is not overloaded.