Use of cookies
This website uses cookies and various web services to provide you with an optimal user experience. By using mandatory cookies, we ensure that all main functions of this website are available to you.
With your agreement, further features of our website will become available to you, such as searching for retail shops, product videos and sharing content with friends.
You can revoke your agreement at any time. Information on this and even more on the subject of cookies and the various web services can be found in our Privacy Policy.
Hama MiniPro II Lens Pen, 15 pieces in a display box
A lens pen allows you to gently clean lenses and filters from dust and other smudges and leaves a clear, streak-free finish. The brush is designed for removing dirt particles and the velvety surface for wiping the lens clean. Brilliant!
-
Technical Specs
Design (Colour, Pattern, Motif, Series) Colour Silver Shade of colour Silver Physical Properties Material Plastic Material Material Cleaning Spike Special Velvet Special Feature Integrated cleaning brush Size & Weight Diameter Cleaning Spike 8 mm Nib Length 9 cm -
More product information
- Allows highly effective and gentle cleaning of all optical surfaces, specially designed for small optical surfaces
- Removes dust, grease spots and other smudges
- Does not dry out
- With a lens brush for dry precleaning
- Flat velvety surface
- Diameter: 8 mm, especially for small optical surfaces
-
What's in the Box
- 15 lens pens
-
Note for Consumers
Please note the following when using the lens pen:
1. Push the brush forward out of the protection chamber using the red slide. Remove the dust particles using the lens brush.
2. Remove the opposite cap. Slowly remove the dirt using the special velvet in short circular movements. After use, re-attach the cap and rotate it once - this will activate the fibers.
3. For difficult to remove dirt, breathe on the lenses and repeat procedure.
Not suitable for cleaning camera mirrors. The lens pen is only suitable for small optical surfaces.
FAQs
-
When I touch the lens pen with my finger, the finger is marked in black. Does the black colour have any effects on the lens when it is cleaned?
The lens pen has been designed for being used on a lens and therefore leaves traces on other materials. The carbon cleaning tip is immediately ready for use and allows you to clean all optical surfaces quickly, gently and thoroughly.
It is important that you remove the dirt with the lens pen in short circular movements from the inside to the outside of the lens. By doing so, the dirt is dissolved and absorbed by the pad.
Please note the following when using the lens pen again: Put on the cap again, a rotary movement activates the chemical compound once again so that the lens pen can be used for about 50 to 100 times depending on the degree of soiling. Afterwards it should be replaced. Laboratory tests have shown that the lens pen cleans lenses much more gently than conventional cleaning systems.
If you use the lens pen as described, you will get a clean filter/lens glass.
