Hama LED tube, T8, 60 cm, 1100lm replaces 18W, G13, matt, cool white

Technical details

• Technical Specs

  Design (Colour, Pattern, Motif, Series)

  Colour Reproduction Index RA (min.)	80
  Light Colour	Cold White

  Physical Properties

  Can be Dimmed	No
  Colour Temperature	6500 K
  Design	T8 Tube
  IP protection class	IP20 (Dry Rooms)
  Lamp socket	G 13

  Size & Weight

  Height

  604 mm

  EPREL

  EPREL_registration number

  2477955

• More product information
  • energy-efficient, long-lasting LED fluorescent tube in matt and cool white with a power consumption of 10 watts as a replacement for a conventional fluorescent tube
  • daylight white light for constant, maximum brightness and concentration
  • easy exchange of fluorescent tubes, which are operated in lamp housing using starters and a conventional AC-adapter (CLB and LLB)
  • No conversion of lights required - the supplied dummy starter must, however, be exchanged with the existing starter
  • reliable colour reproduction for everyday applications
  • frosted cover for even, glare-free light distribution
  • broad beam angle for the even illumination of larger areas
  • LED tube for use as office and work lighting, in garages and workshops, etc.
  • 100% brightness immediately after switch-on without warm-up time or flickering
• What's in the Box
  • 1 LED tube
  • 1 starter
  • 1 operating manual
• Note for Consumers

  Only for private use, not for long-term commercial use.
  Only for use in individual switching (lights have their own starter for each fluorescent tube).
  Not suitable for electronic ballasts (lights without starters).
  
  CLB = Conventional Loss Ballast, the most widespread system
  LLB = Low Loss Ballast
  EB = Electronic Ballast
  
  Any changes to the wiring should only be carried out by qualified electricians. Incorrect installation could result in injury or damage to property.
  Before carrying out any conversion work, ensure that there is no voltage.
  Any defects due to incorrect installation are not covered by the warranty.
  In addition to the power consumption of the LED tubes, CLBs that have not been disconnected/bypassed in particular have a high and unnecessary power loss and can cause high voltage peaks in some cases. Voltage peaks reduce the service life of the tubes. The disconnection/bypass must only be carried out by a qualified electrician.
  Power loss in LLBs is considerably lower and so disconnection/bypass is not so important.
  
  If a light that has been converted to LED tubes is fitted with fluorescent tubes once again, a fluorescent tube starter will need to be refitted. Every light that has been converted to LED tubes should feature a warning notice next to the starter.
  
  The overall efficiency and light distribution is determined not just by the characteristics of the LED tubes, but also by the construction and characteristics of the lights.

• Manufacturer information
  Hama GmbH & Co KG, 86652, Monheim, https://hama.com