Technical details
-
Technical Specs
Design (Colour, Pattern, Motif, Series) Colour Reproduction Index RA (min.) 80 Light Colour Warm White Electrospecific Properties EAR Reg.No. DE 38720470 Energy consumption in on-mode 18 kWh/1000h Energy Efficiency Class A to G E Input Voltage 220-240 V L70B50 lifetime for LED and OLED light sources 25000 h Lighting technology used LED Lamp Light source Non-directiona Mains Frequency 50/60 Hz On-mode power (Pon): 18 W type of electricity AC Useful luminous flux (Φ360) 2000 lm Physical Properties Can be Dimmed No Colour Temperature 2700 K IP protection class IP20 (Dry Rooms) Lamp socket T8 Tube Optimal Ambient Temperature 25 °C Power Consumption of an Equivalent Incandescent Lamp 126 W Size & Weight Design / Diameter / Height T8 Tube / 28 mm / 1213 mm Net Weight 190 g EPREL EPREL_registration number 2477920 -
More product information
- energy-efficient, long-lasting LED fluorescent tube in matt and warm white with a power consumption of 18 watts as a replacement for a conventional fluorescent tube
- warm white light for a cosy living atmosphere and constant brightness
- easy exchange of fluorescent tubes, which are operated in lamp housing using starters and a conventional AC-adapter (CLB and LLB)
- No conversion of lights required - the supplied dummy starter must, however, be exchanged with the existing starter
- reliable colour reproduction for everyday applications
- frosted cover for even, glare-free light distribution
- broad beam angle for the even illumination of larger areas
- LED tube for use as office and work lighting, in garages and workshops, etc.
- 100% brightness immediately after switch-on without warm-up time or flickering
-
What's in the Box
- 1 LED tube
- 1 starter
- 1 operating manual
-
Note for Consumers
Only for private use, not for long-term commercial use.
Only for use in individual switching (lights have their own starter for each fluorescent tube).
Not suitable for electronic ballasts (lights without starters).
CLB = Conventional Loss Ballast, the most widespread system
LLB = Low Loss Ballast
EB = Electronic Ballast
Any changes to the wiring should only be carried out by qualified electricians. Incorrect installation could result in injury or damage to property.
Before carrying out any conversion work, ensure that there is no voltage.
Any defects due to incorrect installation are not covered by the warranty.
In addition to the power consumption of the LED tubes, CLBs that have not been disconnected/bypassed in particular have a high and unnecessary power loss and can cause high voltage peaks in some cases. Voltage peaks reduce the service life of the tubes. The disconnection/bypass must only be carried out by a qualified electrician.
Power loss in LLBs is considerably lower and so disconnection/bypass is not so important.
If a light that has been converted to LED tubes is fitted with fluorescent tubes once again, a fluorescent tube starter will need to be refitted. Every light that has been converted to LED tubes should feature a warning notice next to the starter.
The overall efficiency and light distribution is determined not just by the characteristics of the LED tubes, but also by the construction and characteristics of the lights. -
Manufacturer information
Hama GmbH & Co KG, 86652, Monheim, https://hama.com
