EN

Hama LED Filament Lamp, E27, Mesh, Amber, Clear, Extra Warm White, Dimmable

00232607

Technical details

  • Technical Specs
    Design (Colour, Pattern, Motif, Series)
    Colour Reproduction Index RA (min.) 80
    Light Colour extra warm white
    Electrospecific Properties
    EAR Reg.No. DE 38720470
    Energy consumption in on-mode 5 kWh/1000h
    Input Voltage 220-240 V
    L70B50 lifetime for LED and OLED light sources 15000 h
    Lighting technology used LED Lamp
    Light source Non-directiona
    Mains Frequency 50/60 Hz
    On-mode power (Pon): 4.9 W
    type of electricity AC
    Useful luminous flux (Φ360) 180 lm
    Physical Properties
    Can be Dimmed Yes
    Colour Temperature 1800 K
    IP protection class IP20 (Dry Rooms)
    Lamp socket E 27
    Optimal Ambient Temperature 25 °C
    Power Consumption of an Equivalent Incandescent Lamp 19 W
    Size & Weight
    Design / Diameter / Height Mesh / 110 mm / 160 mm
    Net Weight 85 g
    Energy
    Lamp Current 23 mA
  • More product information
    • Energy-efficient, long-lasting LED illuminant with a power consumption of 4.9 Watts as a replacement for a conventional 19-Watt incandescent lamp: dimmable LED filament in mesh design with E27 socket, amber colours and warm white
    • Extra warm-white light for a cosy and relaxed atmosphere
    • Reliable colour reproduction for everyday applications
    • filament bulb in high-quality glass design with classic incandescent lamp character
    • Clear cover for maximum transparency
    • broad beam angle for the even illumination of larger areas
    • LED filament bulb for use in designer and statement luminaires, open pendant and floor lamps, etc.
    • 100% brightness immediately after switch-on without warm-up time or flickering
  • What's in the Box
    • 1 LED filament bulb
  • Note for Consumers

    The LED filament bulb is designed for use in open luminaires: the heat generated by the illuminant during operation can therefore be emitted into the surroundings. The service life prognosis is based on this mode of operation. The service life is reduced by insufficient cooling when used in enclosed luminaires. Only use in lights intended for its use. Allow the illuminant to cool down completely before changing it and switch off the line voltage. Damaged illuminants should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
    Some dimmers can impair the function of the light (flickering, noise).
    Mixed operation, i.e. the simultaneous operation of LED bulbs and standard incandescent bulbs or LED bulbs of different types on one dimmer cable, is not possible. If noises are heard with dimmers that were not noticed with incandescent bulbs: the dimmer is not suitable for LED bulbs.
    Cable dimmers (dimmer integrated into the power cable) require a separate on/off switch since they may not be able to regulate right down to 0.
    Note the dimmer's minimum load, otherwise it may not switch on or it may control the light incorrectly. Simple dimmers usually work from 60W to 400W.
    With integrated dimmers that have a basic brightness setting, this must be set high enough otherwise the LED bulb may not switch on.
    Dim slowly and evenly. Do not dim quickly or with jerky movements.
    Only incandescent bulb dimmers are permitted - not dimmers for transformers, etc.
    Touch dimmers are usually not suitable. The wrong dimmer switch can damage the lamp.

  • Manufacturer information
    Hama GmbH & Co KG, 86652, Monheim, https://hama.com