Technical details
-
Technical Specs
Design (Colour, Pattern, Motif, Series) Colour Reproduction Index RA (min.) 80 Light Colour Warm White Electrospecific Properties Beam angle 36 ° EAR Reg.No. DE 38720470 Energy Efficiency Class A to G F Input Voltage 220-240 V L70B50 lifetime for LED and OLED light sources 25000 h Lighting technology used LED Lamp Light source Directional Mains Frequency 50/60 Hz On-mode power (Pon): 3 W type of electricity AC Useful luminous flux (Φ90) 230 lm Physical Properties Can be Dimmed Yes Colour Temperature 2700 K IP protection class IP20 (Dry Rooms) Lamp socket GU 10 Optimal Ambient Temperature 25 °C Power Consumption of an Equivalent Incandescent Lamp 35 W Size & Weight Design / Diameter / Height Reflector PAR16 / 50 mm / 54 mm Net Weight 41 g Energy Lamp Current 16 mA EPREL EPREL_registration number 2469071 -
More product information
- Energy-efficient, long-lasting LED illuminant with a power consumption of 3 watts as a replacement for a conventional 35-watt incandescent lamp: dimmable LED reflector lamp with plug-in socket in warm white
- Warm white light for a cosy atmosphere
- Reliable colour reproduction for everyday applications
- Clear cover for maximum transparency
- Narrow beam angle for focussed light with accent and spotlighting
- LED illuminant for use in recessed spots, downlights etc.
- 100% brightness immediately after switch-on without warm-up time or flickering
-
What's in the Box
- 1 LED bulb
-
Note for Consumers
The LED light is designed for operation in open luminaires: the heat generated by the illuminant during operation can therefore be emitted into the surroundings. The service life prognosis is based on this mode of operation. The service life is reduced by insufficient cooling when used in enclosed luminaires. Only use in lights intended for its use. Allow the illuminant to cool down completely before changing it and switch off the power supply voltage. Damaged illuminants should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
Some dimmers can impair the function of the light (flickering, noise).
Mixed operation, i.e. the simultaneous operation of LED bulbs and standard incandescent bulbs or LED bulbs of different types on one dimmer cable, is not possible. If noises are heard with dimmers that were not noticed with incandescent lamps: the dimmer is not suitable for LED bulbs.
Cable dimmers (dimmer integrated into the power cable) require a separate on / off switch since they may not be able to regulate right down to 0.
Note the dimmer's minimum load, otherwise it may not switch on or it may control the light incorrectly. Simple dimmers usually work from 60W to 400W.
With integrated dimmers that have a basic brightness setting, this must be set high enough otherwise the LED bulb may not switch on.
Dim slowly and evenly. Do not dim quickly or with jerky movements.
Only incandescent bulb dimmers are permitted - not dimmers for transformers, etc.
Touch dimmers are usually not suitable. Incorrect dimmers can permanently damage lighting. -
Manufacturer information
Hama GmbH & Co KG, 86652, Monheim, https://hama.com
