Hama LED bulb, E27, 1521lm replaces 100W, bulb A60, matt, warm white, can be dimmed

Technical details

• Technical Specs

  Design (Colour, Pattern, Motif, Series)

  Colour Reproduction Index RA (min.)	90
  Light Colour	Warm White

  Electrospecific Properties

  EAR Reg.No.	DE 38720470
  Energy consumption in on-mode	10 kWh/1000h
  Energy Efficiency Class A to G	D
  Input Voltage	220-240 V
  L70B50 lifetime for LED and OLED light sources	25000 h
  Lighting technology used	LED Lamp
  Light source	Non-directiona
  Mains Frequency	50/60 Hz
  On-mode power (Pon):	10.5 W
  type of electricity	AC
  Useful luminous flux (Φ360)	1521 lm

  Physical Properties

  Can be Dimmed	Yes
  Colour Temperature	2700 K
  IP protection class	IP20 (Dry Rooms)
  Lamp socket	E 27
  Optimal Ambient Temperature	25 °C
  Power Consumption of an Equivalent Incandescent Lamp	100 W

  Size & Weight

  Design / Diameter / Height	A60 Bulb / 60 mm / 110 mm
  Net Weight	21 g

  Energy

  Lamp Current

  57 mA

  EPREL

  EPREL_registration number

  2469040

• More product information
  • energy-efficient, long-lasting LED illuminant with a power consumption of 10.5 watts as a replacement for a conventional 100-watt incandescent lamp: dimmable LED bulb in pear shape with E27 socket in matt and warm white
  • Warm white light for a cosy atmosphere
  • frosted cover for even, glare-free light distribution
  • broad beam angle for the even illumination of larger areas
  • LED illuminant for use in classic ceiling lights, floor lamps, table lamps, etc.
  • 100% brightness immediately after switch-on without warm-up time or flickering
• What's in the Box
  • 1 LED bulb
• Note for Consumers

  The LED light is designed for operation in open luminaires: the heat generated by the illuminant during operation can therefore be emitted into the surroundings. The service life prognosis is based on this mode of operation. The service life is reduced by insufficient cooling when used in enclosed luminaires. Only use in lights intended for its use. Allow the illuminant to cool down completely before changing it and switch off the line voltage. Damaged lights should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
  Some dimmers can impair the function of the light (flickering, noise).
  Mixed operation, i.e. the simultaneous operation of LED bulbs and standard incandescent bulbs or LED bulbs of different types on one dimmer cable, is not possible. If noises are heard with dimmers that were not noticed with incandescent bulbs: the dimmer is not suitable for LED bulbs.
  Cable dimmers (dimmer integrated into the power cable) require a separate on/off switch since they may not be able to regulate right down to 0.
  Note the dimmer's minimum load, otherwise it may not switch on or it may control the light incorrectly. Simple dimmers usually work from 60W to 400W.
  With integrated dimmers that have a basic brightness setting, this must be set high enough otherwise the LED bulb may not switch on.
  Dim slowly and evenly. Do not dim quickly or with jerky movements.
  Only incandescent bulb dimmers are permitted - not dimmers for transformers, etc.
  Touch dimmers are usually not suitable. Incorrect dimmers can permanently damage lighting.

• Manufacturer information
  Hama GmbH & Co KG, 86652, Monheim, https://hama.com