00232553
Hama LED filament bulb, E14, 400lm replaces 35W, reflector R50, matt, warm white
Downloads
Technical details
Technical Specs
| Design (Colour, Pattern, Motif, Series) | Colour Reproduction Index RA (min.) | 80 |
| Light Colour | Warm White |
| Electrospecific Properties | EAR Reg.No. | DE 38720470 |
| Energy consumption in on-mode | 0 kWh/1000h | |
| Energy Efficiency Class A to G | D | |
| Input Voltage | 220-240 V | |
| L70B50 lifetime for LED and OLED light sources | 15000 h | |
| Lighting technology used | LED Lamp | |
| Light source | Non-directiona | |
| Mains Frequency | 50/60 Hz | |
| On-mode power (Pon): | 2.9 W | |
| type of electricity | AC | |
| Useful luminous flux (Φ360) | 400 lm |
| Physical Properties | Can be Dimmed | No |
| Colour Temperature | 2700 K | |
| IP protection class | IP20 (Dry Rooms) | |
| Lamp socket | E 14 | |
| Optimal Ambient Temperature | 25 °C | |
| Power Consumption of an Equivalent Incandescent Lamp | 35 W |
| Size & Weight | Design / Diameter / Height | Reflector R50 / 50 mm / 85 mm |
| Net Weight | 23 g |
| Energy | Lamp Current | 30 mA |
| EPREL | EPREL_registration number | 2471755 |
Note for Consumers
The LED filament bulb should only be used in lights intended for its use. Before changing the illuminant, allow it to cool down completely and switch off the power supply voltage. Damaged illuminants should be replaced immediately. No liability shall be assumed for damage caused by incorrect use. The LED filament bulb is designed for operation in open luminaires. The heat generated by the illuminant during operation may be emitted into the surrounding area. The predicted service life is based on this mode of operation. Of course, LED filament bulbs can also be used in enclosed luminaires, but their service life will be reduced due to the lack of cooling. Non-dimmable!