Technical details
-
Technical Specs
Design (Colour, Pattern, Motif, Series) Colour Reproduction Index RA (min.) 80 Light Colour Neutral White Electrospecific Properties EAR Reg.No. DE 38720470 Energy consumption in on-mode 10 kWh/1000h Energy Efficiency Class A to G C Input Voltage 220-240 V L70B50 lifetime for LED and OLED light sources 15000 h Lighting technology used LED Lamp Light source Non-directiona Mains Frequency 50/60 Hz On-mode power (Pon): 9.5 W type of electricity AC Useful luminous flux (Φ360) 1521 lm Physical Properties Can be Dimmed Yes Colour Temperature 4000 K IP protection class IP20 (Dry Rooms) Lamp socket E 27 Optimal Ambient Temperature 25 °C Power Consumption of an Equivalent Incandescent Lamp 100 W Size & Weight Design / Diameter / Height A60 Bulb / 60 mm / 105 mm Net Weight 39 g Energy Lamp Current 63 mA EPREL EPREL_registration number 2469125 -
More product information
- Energy-efficient, long-lasting LED illuminant with a power consumption of 9.5 watts as a replacement for a conventional 100-watt incandescent lamp: dimmable LED filament in pear shape with E27 socket, frosted and in neutral white
- neutral white light for work and general lighting
- Reliable colour reproduction for everyday applications
- filament bulb in high-quality glass design with classic incandescent lamp character
- Frosted cover for even, glare-free light distribution
- Broad beam angle for the even illumination of larger areas
- LED filament bulb for use in classic ceiling lights, floor lamps, table lamps, etc.
- 100% brightness immediately after switch-on without warm-up time or flickering
-
What's in the Box
- 1 LED filament bulb
-
Note for Consumers
The LED filament bulb is designed for operation in open luminaires: the heat generated by the illuminant during operation can therefore be emitted into the surroundings. The service life prognosis is based on this mode of operation. The service life is reduced by insufficient cooling when used in enclosed luminaires. Only use in lights intended for its use. Allow the illuminant to cool down completely before changing it and switch off the power supply voltage. Damaged illuminants should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
Some dimmers can impair the function of the light (flickering, noise).
Mixed operation, i.e. the simultaneous operation of LED bulbs and standard incandescent bulbs or LED bulbs of different types on one dimmer cable, is not possible. If noises are heard with dimmers that were not noticed with incandescent lamps: the dimmer is not suitable for LED bulbs.
Cable dimmers (dimmer integrated into the power cable) require a separate on / off switch since they may not be able to regulate right down to 0.
Note the dimmer's minimum load, otherwise it may not switch on or it may control the light incorrectly. Simple dimmers usually work from 60W to 400W.
With integrated dimmers that have a basic brightness setting, this must be set high enough otherwise the LED bulb may not switch on.
Dim slowly and evenly. Do not dim quickly or with jerky movements.
Only incandescent bulb dimmers are permitted - not dimmers for transformers, etc.
Touch dimmers are usually not suitable. The wrong dimmer switch can damage the bulb. -
Manufacturer information
Hama GmbH & Co KG, 86652, Monheim, https://hama.com
