00220841

Hama TV Wall Bracket, Swivel, Extendable, Long Arm, 165 cm (65"), up to 25 kg

Downloads

Manuals

Download

Quick Start Guide

English
Download

Saftey Sheet

multilingual
Download

Technical Drawing

multilingual
Download

FAQs

How do I adjust the tilt angle?
To adjust the tilt angle, open the fastening screws at the side, set the required tilt, and then secure the screws in place again.
How can I correct the position of the TV after installation?
To compensate any slightly skewed TV, loosen the screw connections on the longitudinal holes on the side nearest the wall. If you have enough play on the wall-side mounting element, move it into a horizontal position with the aid of an external spirit level. Then re-tighten the screw connections.
How do I change the position of the flat screen TV using the rotation setting?
Loosen the corresponding fastening screws and set the desired rotation. Then tighten the screw connection only so far that you can still adjust the TV by hand - i.e. do not tighten it completely. After releasing, the flat screen TV should then remain in the position you selected. This ensures that you can make minor changes to the position of the TV set at any time without using tools.

Technical details

Technical Specs

Design (Colour, Pattern, Motif, Series) Colour Black
Shade of colour Black
Physical Properties Hole Size Attachment Up to M8
Material Steel
Maximum Load Capacity 25 kg
Maximum swivel range 180 °
Model TV

Note for Consumers

In addition to the various installation accessories delivered in the package, we also recommend the following tools: drill, pencil, screwdriver, power screwdriver, measuring tape, open-end spanner, spirit level.

To be able to use the full range of motion, route the cable to the fully extended TV wall bracket and ensure that there is sufficient room for the cable to move.