Hama 2-Way SAT Splitter, fully shielded

FAQs

I have connected two televisions via the SAT splitter but can only use one device. When both TVs are switched on simultaneously I cannot see a programme on none of them.

As for satellite television the programmes are transmitted via four different reception levels (LV, LH, HV, HH). The reception unit in the TV transmits signals to the LNB (14/18 V, 0/22 kHz) on the roof via the antenna cable. This works, however, only when a television operates. So you can only receive programmes with one of the two TVs that are connected to the SAT splitter. For operating several TVs on a SAT system, each television must have its own connection to the LNB (twin-, quadswitch, octo LNB) or multi-switch of the system.

Technical details

Technical Specs

Connectivity (Connection)	Input	F Socket
	Isolation (min.)	20 dB
	Number of Outputs	2
	Output	F Socket

Electrospecific Properties	Frequency Range	5 Mhz - 2400 Mhz
	Impedance	75 Ω
	Transmission Loss	5 dB +/- 2 dB

Note for Consumers

Only one receiver each can be used in case of SAT connection. In case of cable connection you can watch different programmes on all receivers.